All posts by Joe Wrenches
-
Pro Street Eclipse – Part 20 – Completing the Front Suspension
Hey, Joe Here! In this episode, I continue working on the front end by finishing up the front brakes and suspension.
-
Pro Street Eclipse – Part 19 – Assembly Begins
Hwy, Joe here. In this episode, I begin assembly on the Pro Street Eclipse, beginning with fuel and brake line, and then prepping and installing...
-
Ethanol Content Sensor – Joe Wrenches Vlog #23
In this episode, We get the ethanol content sensor installed so I can run Flex Fuel on the Talon. ECMLink makes this relatively easy, and...
-
Fluidampr Test – Joe Wrenches Vlog #22
In this video, I do some very unscientific testing of the Fluidampr Harmonic Dampener.
-
DIY Front Undertray – Joe Wrenches Vlog #21
In this video, I show how I built a front under tray for my 1993 Eagle Talon to direct airflow properly and maybe help with...
-
Upgrading to Speed Density – Joe Wrenches Vlog #20
Hey, Joe here! I recently upgraded to Speed Density from a Mass Air Flow sensor. I did this using ECMLink and the Speed Density harness...
-
How to Log Fuel Pressure – Joe Wrenches Vlog # 19
Hey Joe here. In this video, I pick up after installing the fuel pressure sensor and running the wires through the firewall. I make all...
-
Fuel Pump Rewire – Joe Wrenches Vlog #18
Hey, Joe Here! This video shows how I did a fuel pump rewire. The results are incredible!
-
Fuel Feed Upgrade – Joe Wrenches Vlog #17
Hey, Joe here! In this video, I show how I upgraded my fuel feed line for better flow and to add fuel pressure monitoring.
-
Fuel Pump Swap – Joe Wrenches Vlog # 16
Hey! Joe here. In this video I swap out my Walbro 255 HP for a Walbro 450 E85 pump. The 450 doesn't exactly bolt right...